Ex Demo Machine
Fabricated, painted machine structure with 3-axis servo drive and  colour touch screen. No product-no bag and misplaced product detectors. Top feed wrapping material up to 500mm wide. Adjustable folding box to suit wide product range. Single rotary action end seal jaw 250mm wide with knife/anvil for pack separation. 4 individual heater controls. Operating speed up to 80 packs per minute or so. 1.5 metres of infeed conveyor for manual loading of product. All contact parts in stainless steel or food quality plastic.
This is a new ex-demo machine.

Ex Demo Machine
Fabricated, painted machine structure with 3-axis servo drive and  colour touch screen. No product-no bag and misplaced product detectors. Top feed wrapping material up to 500mm wide. Adjustable folding box to suit wide product range. Single rotary action end seal jaw 250mm wide with knife/anvil for pack separation. 4 individual heater controls. Operating speed up to 80 packs per minute or so. 1.5 metres of infeed conveyor for manual loading of product. All contact parts in stainless steel or food quality plastic.
This is a new ex-demo machine.

Fabricated, painted machine structure with 3-axis servo drive and colour touch screen. No product-no bag and misplaced product detectors. Top feed wrapping material up to 700mm wide. Adjustable folding box to suit wide product range. Single rotary action end seal jaw 350mm wide with knife/anvil for pack separation. 4 individual heater controls. Operating speed up to 80 packs per minute or so. 1.5 metres of infeed conveyor for manual loading of product. All contact parts in stainless steel or food quality plastic.

Fabricated, painted machine structure with 3-axis servo drive and colour touch screen. No product-no bag and misplaced product detectors. Top feed wrapping material up to 700mm wide. Adjustable folding box to suit wide product range. Single rotary action end seal jaw 350mm wide with knife/anvil for pack separation. 4 individual heater controls. Operating speed up to 80 packs per minute or so. 1.5 metres of infeed conveyor for manual loading of product. All contact parts in stainless steel or food quality plastic.

Low cost mechanical machine in painted finish (one machine in complete
stainless steel construction available).
2 metres of infeed conveyor for manual loading with multi-pitch pusher chain.
Single film reel shaft for up to 500mm film width
Adjustable folding box.
3 sets of horizontal sealing wheels.
Single rotary action end seal jaw 220mm wide with knife/anvil for pack
separation.
4 individual heater controls.
Operating speed up to 70-80 packs per minute.
Requires standard 240v electrical supply.

Low cost mechanical machine in painted finish (one machine in complete
stainless steel construction available).
2 metres of infeed conveyor for manual loading with multi-pitch pusher chain.
Single film reel shaft for up to 500mm film width
Adjustable folding box.
3 sets of horizontal sealing wheels.
Single rotary action end seal jaw 220mm wide with knife/anvil for pack
separation.
4 individual heater controls.
Operating speed up to 70-80 packs per minute.
Requires standard 240v electrical supply.

October 28 – October 31, 2012. McCormick Place. Chicago, Illanois. USA.
Join 45,000 colleagues in Chicago this October to explore a full array of both packaging and processing innovations on the industry’s most dynamic show floor. Go home with the trends, technologies and integrated solutions you need to optimize operations across the line.
Everything you need to increase efficiency, reduce recalls, maintain equipment and protect your brand is here—your total system solutions in one powerful show.

Horizontal Flow wrap machine.

The BG 2800 produces flow pack packages with three seals that have a perfect appearance. Designed for High Speed packaging, in MAP as well, with completely air tight seals, compact, smooth, free from product wrinkles and of the highest quality for when the package appearance is of the highest importance.

ARAone dairy foods

ARAone equipment with the high demands of the dairy foods industry reach a production speed of 900 sticks per minute, boxing included, with a standard version in cornerless stainless steel, integral CIP and baths.

ARAfrom free flowing products.

ARAfrom equipment is specifically designed for product dosage in granulated and semi-granulated products. A modular system and high production rates are its most important characteristics.

ARAopris powder

ARAopris equipment has been specially created to offer high performance in the packaging process of powdered products, from hotel and catering to dietary products, fatty products and food in general.

ARAnorth liquid & paste

ARAnorth equipment offers a perfect balance between performance and effective cleaning and maintenance systems. With capacity of up to 1,200 sticks per minute, automatic nozzle heights, centralised lubrication and tool-free cleaning.

ARAimagin stick pack w/shape

ARAimagin is the latest proposal for the classical StickPack, the final design can be adjusted to its final shape to provide a unique and distinctive package. A picture tells a thousand words.

ARAtwin two different textures in the same sachet

ARAtwin equipment has been specially created to offer high performance in the packaging process of two different products into the same sachet.

Liquid + liquid, powder + powder or liquid + powder. Independent compartments and use friendly for selfservice.

From hotel and catering to food in general or pharmaceutical solutions. Twinpack innovate sachet, where we put the products and consumer choice the quantities.

ARApharm pharmacy

The design of our new ARApharma guarantees the rejection of non-approved packages while minimising the total number of rejected packs. The complete range is highly qualified, in compliance with the demands of the pharmaceutical industry.

ARAice ice lollies producers

ARAice is the versatile solution for packaging ice lollies using the same flavour or combining up to 10 flavours per cycle. Applicable in an extra-long version with a double extrusion system, automatic nozzle elevation, centralised lubrication and tool-free cleaning.

Stickpack + Cartoning machine

A complete line with continual or intermittent packager, with an option of simultaneous connection to other equipment and a final verification system. Unit system with servomotor and boxing machine connection, stick unit counter for multiple packs.

Stickpack + Flowpack machine

A complete turnkey solution, packaging and box wrapping line, with all the guarantees of ARANOW equipment, its maintenance and modular system together with high productions define it as a highly competitive line.

The ZENITH is a vertical form fill & seal packaging machine which produces closed packets with three seals from a roll of heat-sealable material.
The Zenith is particularly compact thanks to the intelligent use of electronics and the proportions of the various components of the machine.
The Zenith can carry out various types of packaging. The Zenith’s setup can be changed exceptionally quickly and so it is perfect when a large range of products needs to be packaged.

The ZENITH is a vertical form fill & seal packaging machine which produces closed packets with three seals from a roll of heat-sealable material.
The Zenith is particularly compact thanks to the intelligent use of electronics and the proportions of the various components of the machine.
The Zenith can carry out various types of packaging. The Zenith’s setup can be changed exceptionally quickly and so it is perfect when a large range of products needs to be packaged.

The Vetta is a Form Fill Seal machine that separates itself from the rest of the pack by offering “multiple bag style” varieties and the versatility of many machines in one system.

The Vetta can offer up to 20 different bag styles, from standard vertical form fill and seal using clear or printed film, to stand-up oval bottom bags with sombrero hole punch, “all on one machine”.

The Vetta uses the latest technology, allowing zipper integration and our patented resealable tab and/or reclosable adhesive strip options.

The Vetta is a Form Fill Seal machine that separates itself from the rest of the pack by offering “multiple bag style” varieties and the versatility of many machines in one system.

The Vetta can offer up to 20 different bag styles, from standard vertical form fill and seal using clear or printed film, to stand-up oval bottom bags with sombrero hole punch, “all on one machine”.

The Vetta uses the latest technology, allowing zipper integration and our patented resealable tab and/or reclosable adhesive strip options.

The ZC1 integrated solution optimises the weigher-packaging machine combination by making the most of the Series C1 multi-head weigher and the Zenith model vertical packaging machine.

The ZC1 offers high quality standards which translate into high weighing accuracy, aesthetically perfect packages and easy maintenance, programming and operating safety over time.

The ZC1 integrated solution optimises the weigher-packaging machine combination by making the most of the Series C1 multi-head weigher and the Zenith model vertical packaging machine.

The ZC1 offers high quality standards which translate into high weighing accuracy, aesthetically perfect packages and easy maintenance, programming and operating safety over time.

ATHENA DOUBLE

The automatic sealing machine model Athena Double is the double chamber version which can have two identical moulds to double productivity. The Athena Double can also work with two different moulds, which can be selected from the PLC based on which you need to use. This function makes the machine muchmore flexible and reduces stop time of themachine. The price-quality combination and Tecnovac’s high quality standards make this machine the best solution to improve productivity.

Adelphi Cerberus

The Adelphi Cerberus monobloc compact filling machine is designed for the automatic filling, stopping and sealing of small containers from 1ml to 250ml.

The machine is floor mounted and has a stainless steel frame, is PLC controlled and designed for ease of cleaning and change over with GMP in mind.

The machine is based on the monobloc principle and has stations for filling, stoppering and capping as necessary. “No bottle no fill” and “No cap” or “badly tightened cap” sensors are controlled by the PLC control system with a diagnostic screen mounted to one side of the machine.

Output up to 2,800 tubes per hour, suitable for tube diameters from 10-42 mm and lengths 50-235 mm (approx. 2-300 ml).

Automatic tube loading from hand fed chute, fitted with tube print orientation, sensor to detect the tube is the correct way up, automatic filling (with pneumatic shut off), closing and ejection. 4 sets of jaws for closing metal with an additional set for saddlefold. 50 ltr capacity stainless steel hopper with lid. Fitted with safety interlocked guarding. Services: electrical 415V/3ph/50Hz, 1.5 kW; compressed air 150 ltr/min. @ 6-8 bar.

TGM model S400 Prima fully automatic all stainless steel tube filling and closing machine. It has a hot jaw sealing system for plastic tubes, heated product hopper with agitator/stirrer, auto tube registration system for printed tubes, 12 station indexing turret with trimming and coding, full guarding with safety interlock system, a selection of tube-holder change parts. Plastic tube diameter range: 10 – 50mm; tube height range: 50 – 235mm. Output speed max 3200 tubes per hour. Machine power requirements: 5.5kw. Cooling water rate: 2 litres/min; Compressed air requirements: 250 litres/min; Overall dimensions: 1020 x 2300 x 1980mm high.

Trepko’s 200 Series provide flexible and effective solutions for filling and closing pre-formed containers. The machinery within this range achieves outputs from 2,400 up to 14,3000 cups/hour. Four machine sizes are available (210-220-230-240) dependent on the required output, container size and options required, each with different frame sizes and number of lanes.

Full servo horizontal pillow-pack wrapper to obtain pillow-pack style packs from a flat reel of heat/cold sealable wrapping material. Sturdy construction with a carbon steel fabricated frame, compact design, cutting edge hardware, reliable and operator friendly control software are the results achieved in this project, expression of experience achieved in many years of manufacturing of flowpack machines and automated lines. A high quality innovative machine.

Interpack 2014 picks up where its highly successful predecessor left off in 2011.
www.interpack.com
 
 

Automatically erects horizontal end load cartons that are filled by hand and then automatically closes and glues.

Click here to visit the ADCO website

Supercloser SC400 Polybag-in-box Decuffer Folder Closer.

This machine automatically un-cuffs a filled polybag in a box, clear of the case flaps, opens the side flaps and folds the polybag into a neat two-way fold within the dimensions of the case to protect the product.

Automatically erects horizontal end load cartons that are filled by hand and then automatically closed

Click here to visit the ADCO website

End load cartons are opened and filled by hand, then placed onto the infeed conveyor which takes them into the machine and seals the flaps square.

Click here to visit the ADCO website

Automatically erects, fills, and closes horizontal end load cartons

Click here to visit the ADCO website

ADCO Balcony Barrel Cam Cartoner
Heavy Duty High Speed End Load Cartoner is designed to withstand the toughest Sanitary Washdown conditions. The Balcony Design has conveniently positioned all the primary components on one side of the machine, vastly improving access for maintenance, cleaning and ease of operation. A fantastic cartoner option for any business.

Click here to visit the ADCO website

Automatically closes and seals randomly supplied tri-seal top load cartons
Click here to visit the ADCO website

Automatically forms Large Paper or Corrugated Tri-Seal Cartons
Click here to visit the ADCO website

Automatically picks, seals, and forms top load cartons/trays via glue

Click here to visit the ADCO website

Automatically picks and forms top load cartons/trays via lock or glue

Click here to visit the ADCO website

Getting things moving.
Moving things at minimum cost. Always having things where you want them, when you want them – Are these your visions?

Automated Guided Vehicle systems deliver that vision. Automated Guided Vehicle systems (AGVs) save time and money. They optimise and smooth transport flow, they increase process efficiency.

E&K AUTOMATION is Europe’s AGV leader, delivering quality, benefits and value, world-wide

Trepko’s 100 Series provides tailor – made and reliable solutions for the filling and closing of pre – formed containers. The rigid and proven mechanical design of the machinery within this series enables high speeds. The machines are built in a format of up to 12 lanes and are offered with double indexing systems which allows for either a fast format size change or a doubling of the machines output.

Feb 28-March 3 - IPACK-IMA is one of the most important international events in the industry of packaging, processing and material handling technology: a large system exhibition showcasing the very top technology and solutions in all food and non-food sectors for industry professionals from every corner of the world.

Here, technology suppliers and end-user companies meet to increase business, create value, share knowledge and expertise and promote innovation, giving birth to a large professional community.

Emrich will attend ipack-ima this year; please contact us if you would like to arrange a meeting with one of or suppliers also attending the show.

www.ipack-ima.it

Fully Automatic Case packing solution

TREPKO wrap-around packers are fully automatic machines which group and pack products in cases or trays formed from a flat sheet of corrugated board. The flat sheet, referred to as a ‘blank’, is folded and glued around the pre-arranged products to form the case/tray.The machine consists of flexible basic modules designed to meet the current customer requirements regarding pack types and sizes and also allows for future additions if and when they are required.

The machine design incorporates unique and interchangeable ‘blank’ feeders to allow different case/tray sizes to run on the same machine. This changeover procedure requires little time with all the different sized change parts easily and quickly accessible.

All packing takes place on one level with a maximum output speed of 20 cases per minute. The machine can also be loaded with several ‘blank’ stacks for longer runs without the need for loading.

Fabricated, stainless steel machine structure with 3-axis servo drive and colour touch screen. No product-no bag and misplaced product detectors. Top feed wrapping material up to 700mm wide. Adjustable folding box to suit wide product range. Single rotary action end seal jaw 350mm wide with knife/anvil for pack separation. 4 individual heater controls. Operating speed up to 80 packs per minute or so. 1.5 metres of infeed conveyor for manual loading of product. All contact parts in stainless steel or food quality plastic.

PFM Packaging Machinery has extended its range of flow-wrappers with a medium-speed electronic machine aimed at the bakery, confectionery and similar food markets.
The PFM Zephyr was developed in conjunction with PFM Group company SPS, which specialises in high-speed count line and biscuit packaging, and offers speeds up to 450 items a minute.

PFM Packaging Machinery has extended its range of flow-wrappers with a medium-speed electronic machine aimed at the bakery, confectionery and similar food markets.
The PFM Zephyr was developed in conjunction with PFM Group company SPS, which specialises in high-speed count line and biscuit packaging, and offers speeds up to 450 items a minute.

Series C1 is the name of the brand new range of entry-level multi-head weighers presented by MBP (PFM Group). The result of two years of research and design, the C1 embodies all the experience MBP has gained in top class weighers toned down into a product which is economical yet has high quality standards.

FALCON is a horizontal flow-wrap type packaging machine which produces packs sealed on three sides from a roll of heat-sealable film.
Perfect for rapid and frequent set-up changes without compromising high-speed packaging (max 200 mechanical cycles per minute).

Packages products in the foodstuffs sector, the cosmetics sector, the pharmaceutical sector and the stationery sector.

The C2 Series is a combination Multihead weigher designe to weigh, at high speed (Speeds of up to 200 wpm on a 14-head single-discharge) and with extreme precision, various types of products. The working principle is based on the distribution of the product onto weigh buckets and on the identification of the best discharged combination, which is reached through an algorithm of combinatorial calculation, in order to obtain the best possible speed/precision relation. The Multihead weigher is subject to a mechanical customization based on the specific characteristics of product.

BORA horizontal flow-pack type packaging machine for producing packs sealed on three sides from a roll of heat-sealable packaging film.
Bora unites a high degree of operating flexibility with an excellent production capacity.
The maximum packaging speed is 200 mechanical sycles per minute while the average set-up changing time is about 3 minutes.
For packaging products in the foodstuffs sector.
Modular construction facilitates machine customisation and assures complete protection of the internal components.

BORA horizontal flow-pack type packaging machine for producing packs sealed on three sides from a roll of heat-sealable packaging film.
Bora unites a high degree of operating flexibility with an excellent production capacity.
The maximum packaging speed is 200 mechanical sycles per minute while the average set-up changing time is about 3 minutes.
For packaging products in the foodstuffs sector.
Modular construction facilitates machine customisation and assures complete protection of the internal components.

Series C3 with Memory Buckets optimises Twin and 2 to 8 multi-flavour versions.
The Series C3 was developed to provide an effective solution to the demand for high productivity combined with the need to weigh and mix a variety of products in a single pack. Available with 8-10-14-16-20-24 buckets, it features IP66 protection rating and is therefore completely washable. It is operated through an industrial PC with a 15″ touch screen featuring extremely powerful, and easy to programme Windows software.

HURRICANE: horizontal flow-wrap type packaging machine for producing packs sealed on three sides from a roll of heat-sealable packaging film.
Hurricane unites a high degree of operating flexibility with an excellent production capacity.
The maximum packaging speed is 100 mechanical sycles per minute while the average set-up changing time is about 3 minutes.
For packaging products in the foodstuffs sector in general, as well as cosmetics, pharmaceutical products, stationery products and many other products.
Modular construction facilitates machine customisation and assures complete protection of the internal components.